KNX 4CH 7A RGBW Driver has 4 RGBW driving channels, each channel has the output capacity
of 7A.The four channels can be controlled separately or using RGBW
combination control. PWM linear dimming can set the dimming response
time and the upper and lower limits of the dimming. The dimming is
stable and diversified to meet the needs of different occasions.
PWM liner dimming
Dimming lower / upper limit
setting
Dimming fade time setting
1 bit switch state response
1 byte brightness state response
3 bytes RGB color response *
State recovery after power on
Staircase light
Flashing light
Scene function (10 scenes
supported for each channel)
Logic function
Threshold value
Up to 5 sequences, with 24 steps
for each
Custom on/off *
Color selection and
transformation for combination mode *
The polarity protection function
of DC power supply will prevent from destroy the device when the positive and
negative electrodes are connected in reverse.
Note: * Only for RGBW combination mode.
Basic Parameters
Working voltage 21~30V DC
Working current 10mA/30V DC
Communication KNX/EIB
Output type Constant voltage PWM
output
Output channel R, G, B,W
4channels
Output current 7A/CH (total 28A)
LED type Common anode RGBW LED
strip or single LED
Cable diameter of KNX terminal
0.6-0.8mm
Input power (for LED) 12~40V DC
External Environment
Working temperature -5℃~45℃
Working relative humidity ≤90%
Storage temperature -20℃~60℃
Storage relative humidity ≤93%
Specifications
Dimensions 183mm×84mm×39mm
Net weight 212g
Housing material ABS, PC,
Aluminum
Installation Fixed with screws
Protection rating (Compliant with
EN 60529) IP20
KNX 4CH 7A RGBW Driver
Votre snippet dynamique sera affiché ici...
Ce message s'affiche parce que vous n'avez pas défini le filtre et le modèle à utiliser.
Nous utilisons des cookies pour vous offrir une meilleure expérience utilisateur sur ce site.Politique relative aux cookies
KNX 4CH 7A RGBW Driver