Skip to Content
  1. All products
  2. Domotique
  3. HDL
  4. HDL-M/LCR.1 KNX Line Coupler
  5. HDL
Pricelist: Revendeurs HDL10 Pricelist
Pricelist: Revendeurs HDL10 Pricelist

HDL-M/LCR.1 KNX Line Coupler

KNX Line Coupler

HDL
495.00 CHF 550.00 CHF
550.00 CHF

495.00 CHF / Units
  • Packaging
Add to cart

Conditions générales
2 ans de garantie
Shipping: 2-3 Business Days

KNX Line Coupler can be used as a line coupler or repeater (for address extension), which can be connected to a main line and a sub line when the device works as a line coupler. A separate power supply including a chock is required for each new line segment and each line will be electrically isolated. Through the line coupler, packet filtering can be carried out between the two lines, reducing the amount of telegrams, preventing interference, and maintaining efficient communication.


  • The coupler is connected to KNX zone/line to enable zone/line isolation. Data packets can also be filtered to reduce telegram traffic and maintain good communications.
  • When the device works as a branch coupler, the branch main line and branch sub-line can be connected. When works as a region coupler, the region main line and branch Bus can be connected.
  • The device can be used as a line coupler or repeater.
  • 6 LEDs display data transmission status and 1 LED for programming status display.

Basic Parameters

  • Working voltage 21~30V DC
  • Communication KNX/EIB
  • Main line current ＜30mA
  • Sub line current 3mA
  • Cable diameter of KNX terminal 0.6 - 0.8mm

External Environment

  • Working temperature -5℃~45℃
  • Working relative humidity ≤90%
  • Storage temperature -20℃~ 60℃
  • Storage relative humidity ≤93%

Specifications

  • Dimensions 90mm×36mm×70mm
  • Net weight 68.4g
  • Housing material ABS
  • Installation 35mm DIN rail installation
  • Protection rating (Compliant with EN 60529) IP20


KNX Line Coupler